Ancient British Coins

Coin 01 · Cunobelin (North Thames region: Catuvellauni and Trinovantes)

Cunobelin seated Victory copper-alloy unit

A copper-alloy unit of Cunobelin. The record gives his name in two panels on one face and a seated Victory on the other; this specimen is heavily corroded.

Issuer or group
Cunobelin (North Thames region: Catuvellauni and Trinovantes)
Metal
Copper-alloy unit
Date (record)
AD 8–41
Catalogue refs (record)
ABC 2918; BMC 1921–1927
Specimen
PAS 756076
Specimen size
Not in the record. The model is about 14.6 mm across, estimated from the scale in the photograph.

Both faces are heavily corroded. The obverse lettering cannot be read on this specimen, so the as-minted obverse is shown plain and marked as not reconstructed.

The reverse is reconstructed only to outline level: the seated figure's details are not visible.

Diameter and weight are not in the record.

The default view is an interpretive reconstruction of the coin as newly struck, made from photographs of one found coin. It is not a scan or a replica.

Subscriber feature Identification notes for 2 features and 2 comparisons. Not on sale yet. What subscribers will get

As minted (reconstruction)Found: PAS 756076
As minted: interpretive reconstruction
Loading the 3D coin…
MintedFound

Cunobelin seated Victory copper-alloy unit

Coin 01 · Cunobelin (North Thames region: Catuvellauni and Trinovantes)

A copper-alloy unit of Cunobelin. The record gives his name in two panels on one face and a seated Victory on the other; this specimen is heavily corroded.

Issuer or group
Cunobelin (North Thames region: Catuvellauni and Trinovantes)
Metal
Copper-alloy unit
Date (record)
AD 8–41
Catalogue refs (record)
ABC 2918; BMC 1921–1927
Specimen
PAS 756076
Specimen size
Not in the record. The model is about 14.6 mm across, estimated from the scale in the photograph.

Obverse. CVNOBE / LINI in two panels, with a pellet-in-ring above and below (record; the record brackets the legend as not fully legible). Not reconstructed

Reverse. Victory seated left, with TASC below the ground line (record; TASC is bracketed in the record). Not reconstructed

Both faces are heavily corroded. The obverse lettering cannot be read on this specimen, so the as-minted obverse is shown plain and marked as not reconstructed.

The reverse is reconstructed only to outline level: the seated figure's details are not visible.

Diameter and weight are not in the record.

Features

#FeatureFaceAs-minted evidenceOn the found coinNote
1Seated figureReverseObserved in the photoPartly visible on this findThe outline of a figure seated on a chair or throne, in the upper left and centre of the face.
2Tall upright lineReverseObserved in the photoPartly visible on this findA long raised upright line to the right of the figure.

In the record but not modelled

The found specimen

Wear
Heavy: the reverse figure survives only as an outline; the obverse lettering is gone.
Corrosion
Heavy green corrosion and crusting over both faces.
Strike
Cannot be judged from the photo.
Completeness
Flan appears whole but has an irregular, uneven outline.

These are descriptions, not grades. Thickness in the model: inferred (no weight or thickness recorded): set to 8.5% of the diameter.

Source and licence

Based on a photograph by Andrew Brown / The British Museum, via the Portable Antiquities Scheme and Wikimedia Commons (file page as retrieved, revision 1166326332), licensed CC BY 2.0. Changes: the two faces were cut out of the photograph, rotated and rescaled to a common frame, and used to make an interpretive 3D reconstruction. Depth, the edge and unseen surfaces are inferred, not measured. The as-minted version is further cleaned, restored and recoloured by us.

SHA-256 of the archived original: 02c91bf0d6677594a6732a35ff12844ccbd400cd2d27a702e41cba619592c42b. Retrieved 2026-10-16.